Envalior / Lanxess Durethan B30S F30 is a 30% glass fiber reinforced PA6 resin offering exceptional rigidity, high tensile strength, and superior heat resistance.
| Manufacturer | Envalior |
|---|---|
| Density | 1.35 g/cm³ |
| Tensile Strength at Yield | 70 MPa |
| Elongation at Break | 9.0 % |
| Elongation at Yield | 3.7 % |
Note: See the product description for additional technical specifications
Envalior / Lanxess Durethan® B30S F30 PA6 is a high-performance 30% glass fiber reinforced polyamide 6 (PA6 / Nylon 6) engineering plastic pellet engineered for high-strength industrial and automotive structural components. Originally developed and produced by German specialty chemicals giant Lanxess, this grade now belongs to Envalior, a global leader in high-performance materials.
From a fundamental material perspective, Durethan® B30S F30 is a standard-flow injection molding grade resin featuring a uniform natural or black pellet appearance. By incorporating 30% by weight of chopped glass fiber reinforcement, this material substantially boosts tensile strength, flexural modulus, and heat deflection temperature while maintaining the good processability of PA6 resin, achieving an optimal balance of high rigidity and mechanical strength.
As one of the benchmark grades in the global engineering plastics sector, Durethan® B30S F30 boasts mature application performance in automotive under-the-hood components, power tool housings, and heavy-duty industrial machinery parts. Its outstanding dimensional stability, fatigue resistance, and resistance to chemical media make it an ideal material solution for replacing traditional metal parts to achieve structural lightweight design.
| Item | Property Value | Unit | Test Standard |
| Density | 1.35 | g/cm³ | ISO 1183 |
| Mold Shrinkage, Parallel | 0.5 | % | Post-shrinkage, 60x60x2, 120°C, 4 hour, ISO 294-4 |
| Mold Shrinkage, Parallel | 0.8 | % | 600 bar, 60x60x2, 260°C / MT 80°C, ISO 294-4 |
| Mold Shrinkage, Normal | 0.8 | % | Post-shrinkage, 60x60x2, 120°C, 4 hour, ISO 294-4 |
| Mold Shrinkage, Normal | 1.1 | % | 600 bar, 60x60x2, 260°C / MT 80°C, ISO 294-4 |
| Item | Property Value | Unit | Test Standard |
| Tensile Stress at Yield (50 mm/min) | 70 | MPa | d.a.m., ISO 527-1, -2 |
| Tensile Strain at Break (50 mm/min) | 9 | % | d.a.m., ISO 527-1, -2 |
| Tensile Strain at Yield (50 mm/min) | 3.7 | % | d.a.m., ISO 527-1, -2 |
| Tensile Modulus (1 mm/min) | 3600 | MPa | d.a.m., ISO 527-1, -2 |
| Flexural Strength (Strain 3.5%, 2 mm/min) | 110 | MPa | ISO 178-A |
| Flexural Stress at Yield (Strain 3.5%, 2 mm/min) | 100 | MPa | ISO 178-A |
| Flexural Modulus (2 mm/min) | 3200 | MPa | ISO 178-A |
| Izod Notched Impact Strength, Dry (23 °C) | ≤ 10 | kJ/m² | ISO 180/1A |
| Izod Notched Impact Strength, Dry (-30 °C) | ≤ 10 | kJ/m² | ISO 180/1A |
| Izod Unnotched Impact Strength, Dry (-30 °C) | 100 | kJ/m² | ISO 180/1U |
| Izod Unnotched Impact Strength, Dry (23 °C) | 120 | kJ/m² | ISO 180/1U |
| Charpy Unnotched Impact Strength (-30 °C) | 130 | kJ/m² | d.a.m., ISO 179-1eU |
| Charpy Unnotched Impact Strength (23 °C) | 150 | kJ/m² | d.a.m., ISO 179-1eU |
| Charpy Notched Impact Strength (23 °C) | ≤ 10 | kJ/m² | d.a.m., ISO 179-1eA |
| Charpy Notched Impact Strength (-30 °C) | ≤ 10 | kJ/m² | d.a.m., ISO 179-1eA |
| Item | Property Value | Unit | Test Standard |
| Melting Temperature (10 °C/min) | 222 | °C | ISO 11357 |
| Heat Deflection Temperature (1.8 MPa) | 70 | °C | ISO 75-1, 2 |
| Flammability Rating (0.4 mm) | V-0 | — | — |
| Flammability Rating (0.75 mm) | V-0 | — | — |
| Flammability Rating (1.5 mm) | V-0 | — | — |
| Flammability Rating (2 mm) | 5VA | — | — |
| Flammability Rating (3 mm) | 5VA | — | GWIT, IEC 60695-2-13 |
| Glow Wire Ignition Temperature (GWIT) (Diameter: 3 mm) | 800 | °C | GWIT, IEC 60695-2-13 |
| Glow Wire Ignition Temperature (GWIT) (Diameter: 0.75 mm) | 960 | °C | — |
| Glow Wire Flammability Index (GWFI) (Diameter: 0.75 mm) | 825 | °C | — |
| Glow Wire Flammability Index (GWFI) (Diameter: 1.5 mm) | 825 | °C | GWFI, IEC 60695-2-12 |
| Glow Wire Flammability Index (GWFI) (Diameter: 3 mm) | 960 | °C | GWFI, IEC 60695-2-12 |
| Glow Wire Flammability Index (GWFI) (Diameter: 0.8 mm) | 960 | °C | GWFI, IEC 60695-2-12 |
| Item | Property Value | Unit | Test Standard |
| Comparative Tracking Index (CTI) | 300 | V | d.a.m., Solution A, IEC 60112 |
Disclaimer: The technical data sheet (TDS) of Envalior / Lanxess Durethan® B30S F30 PA6 material from Envalior / Lanxess corporation, if there are differences, please refer to the official website of Envalior / Lanxess.
Superior Rigidity & Mechanical Strength: Benefiting from 30% glass fiber directional reinforcement, this material exhibits a high tensile modulus of up to 3600 MPa and excellent yield resistance, capable of enduring long-term high-load mechanical stress.
Excellent Heat Deflection Temperature & Heat Resistance: Featuring a melting point of 222 °C, it demonstrates exceptional heat deflection performance under high stress conditions, fulfilling continuous operation demands in automotive engine bays and high-temperature industrial environments.
Good Processing Flowability & Mold-Filling Performance: As a B30S standard-flow base resin, the polymer melt displays good mold-filling capability during injection molding, making it suitable for high-efficiency molding of complex geometries and multi-cavity molds.
Outstanding Dimensional Stability & Low Shrinkage: Parallel anisotropic shrinkage is well controlled (approx. 0.5% – 0.8%), effectively minimizing warpage in injection-molded parts and ensuring dimensional consistency for close-tolerance industrial components.
Grease & Chemical Resistance: The polyamide 6 matrix offers strong chemical inertness against engine oils, diesel, brake fluids, mechanical greases, and various organic solvents, ensuring a long service life.
Envalior / Lanxess Durethan® B30S F30 PA6 is widely utilized in injection molding of structural components requiring high mechanical strength, thermal resistance, and exceptional stability:
Automotive Industry: Intake manifolds, engine covers, control cable brackets, pedal mechanisms, radiator fan blades, and various automotive electrical connectors.
Power Tools & Industrial Equipment: Handheld power tool housings, gearbox casings, pump/valve body assemblies, pipe fastening clips, and load-bearing casters.
Electrical & Electronics: High-voltage switch components, terminal blocks, circuit breaker housings, and structural insulating parts compliant with electrical safety standards.
Construction & Mechanical Accessories: Construction fasteners, pneumatic valve bodies, chain guides, and lightweight transmission elements replacing metals.
Q1: Does Durethan® B30S F30 PA6 require drying before injection molding? What are the drying conditions?
Polyamide (PA6) is highly hygroscopic. To prevent hydrolytic degradation during processing (which leads to surface silver streaks, reduced mechanical strength, or brittleness), thorough pre-drying is mandatory. Desiccant drying is recommended at a temperature of 80 °C – 100 °C for 2 – 4 hours, bringing the final moisture content of the resin below 0.12%.
Q2: What do “B30S” and “F30” signify in the grade designation?
In the Durethan® nomenclature, “B” indicates a PA6 (Nylon 6) polymer matrix; “30S” represents the viscosity and flowability grade of the base polymer (standard flowability); “F30” designates 30% by weight of glass fiber (Fiber/Filling) reinforcement.
Q3: Does Durethan® B30S F30 comply with environmental and electrical safety standards (RoHS / REACH / UL)?
Yes. This product fully complies with the EU RoHS Directive (2011/65/EU) and REACH regulation restricted substance standards. Regarding electrical safety, the material offers good flame retardancy and a Comparative Tracking Index (CTI 300V), meeting internationally recognized industrial and E&E compliance standards.
Submit your inquiry today and receive a professional competitive price tailored to your project requirements.