Celanese PET FR530 BK507 is a glass fiber reinforced and flame-retardant PET engineering plastic featuring exceptional rigidity, dimensional stability, and a UL94 V-0 rating, tailored for demanding electrical and electronic applications.
| Manufacturer | Celanese |
|---|---|
| Density | 1.68 g/cm³ |
| Tensile Modulus | 11300 MPa |
| Flexural Modulus | 10500 MPa |
| Flammability Rating | V‑0 |
Note: See the product description for additional technical specifications
Manufacturer: Celanese (formerly DuPont).
Material Category: Glass fiber reinforced flame-retardant PET (Polyethylene Terephthalate) engineering plastic.
Physical Appearance: Black pellets, uniform particles, no obvious impurities.
Celanese FR530 BK507 is a glass fiber reinforced and flame-retardant modified PET grade under Celanese, which enjoys widespread market recognition in the field of electrical and electronic engineering plastics. This grade achieves high rigidity through glass fiber filling while possessing a UL94 V-0 flame retardancy rating, balancing mechanical properties with fire safety requirements. It is suitable for injection molding processes and primarily targets B2B procurement demands in sectors such as electronic components, electrical accessories, and home appliance internal structural parts.
| Property | Test Condition | Test Value | Unit | Test Method |
| Density | — | 1.68 | g/cm³ | ISO 1183 |
| Property | Test Condition | Test Value | Unit | Test Method |
| Tensile Modulus | — | 11300 | MPa | ISO 527‑1,‑2 |
| Flexural Modulus | — | 10500 | MPa | ISO 178 |
| Property | Test Condition | Test Value | Unit | Test Method |
| Flammability Rating | — | V‑0 | — | UL 94 |
The technical data sheet (TDS) of Celanese (formerly DuPont) PET FR530 BK507 material from Celanese corporation, if there are differences, please refer to the official website of Celanese.
High Modulus and Rigidity: High tensile and flexural modulus values provide the product with excellent structural stiffness to withstand higher loads, making it suitable for load-bearing structural components.
UL94 V-0 Flame Retardancy Rating: Meets fire safety standards in the electrical and electronic industry, allowing usage in components requiring flame retardancy.
Glass Fiber Reinforced Modified Formula: Enhances the mechanical strength of the PET matrix, reduces the risk of deformation caused by temperature changes in the product, and provides good dimensional stability.
Standardized ISO Testing System: All core properties are tested using ISO international standards, facilitating material selection and benchmarking for overseas engineers.
Suitable for Conventional Injection Molding: As a mature engineering plastic grade, it can be processed using standard injection molding equipment with a well-established processing technology system.
Electrical & Electronics Industry: Connectors, terminal blocks, relay housings, switch components, and other electrical components requiring flame retardancy and high rigidity.
Home Appliance Industry: Internal flame-retardant structural brackets for home appliances, power module bases, and internal electrical insulation support parts.
Industrial Components: High-strength flame-retardant structural parts inside equipment and internal accessories for electrical control cabinets.
Consumer Electronics Accessories: Internal skeletons for power adapters and various electronic support structural parts requiring fire safety rating requirements.
Q1: Does PET FR530 BK507 require drying prior to processing? What are the recommended drying conditions?
A: PET materials readily absorb moisture and must be dried before processing to avoid defects such as surface bubbles and silver streaks in injection-molded products. The routine recommended drying temperature is 120–140 °C for 4–6 hours, ensuring the moisture content of the raw material is controlled below 0.05% prior to injection molding.
Q2: Does this grade possess UL certification, and is the UL file queryable?
A: The flame retardancy rating of this grade is UL94 V-0. Relevant UL files can be queried by visiting the official Celanese website for the corresponding grade file. A copy of the UL report can be requested from the supplier prior to procurement for product compliance auditing.
Q3: What are the primary differences between FR530 BK507 and regular unreinforced PET?
A: FR530 BK507 undergoes glass fiber reinforcement and flame-retardant modification, resulting in rigidity and modulus far superior to regular non-reinforced PET, along with V-0 flame retardancy capability. However, material toughness decreases, and the product exhibits glass fiber orientation, making it suitable for structural parts rather than appearance parts requiring high toughness.
Q4: Does this material meet RoHS compliance requirements?
A: This series of engineering plastics from Celanese generally supports RoHS compliance. For actual export selection, it is recommended to request a complete RoHS test report from the supplier for customs and customer review purposes.
Submit your inquiry today and receive a professional competitive price tailored to your project requirements.