LG Chem EA28150 EVA

LG Chem EA28150 is a 28% VA, 150 g/10min MFR ethylene-vinyl acetate (EVA) copolymer offering 900% elongation and Shore A 74 hardness, engineered for hot melt adhesives, extrusion coating, and polymer compounding.

Additional information

Manufacturer

LG Chem

Density

0.946 g/cm³

MFR

150 g/10min

Tensile Strength at Break

4.5 MPa

Elongation at Break

900%

Note: See the product description for additional technical specifications

Product Overview

Manufacturer: LG Chem

Category: EVA (Ethylene-Vinyl Acetate Copolymer)

Appearance: Translucent to milky-white pellets, flexible texture, uniform surface, free from visible mechanical impurities

LG Chem EA28150 is a high vinyl acetate (VA) content, high melt flow rate (MFR) food-contact grade EVA base resin designed for hot melt adhesives and compounding modification. With a VA content of 28.0 wt% and a melt flow rate (190 °C / 2.16 kg) reaching 150 g/10min, it represents a typical “high-flexibility + high-flow” grade within the EVA portfolio, widely utilized in hot melt adhesives, multi-layer compounding, soft-touch overmolding, and elastomeric products.

Within LG Chem’s EVA product matrix, EA28150 serves as a standard benchmark resin for adhesive formulators, plastic compounders, and encapsulation material manufacturers due to its stable polymerization control and batch-to-batch consistency. For procurement specialists and R&D engineers, its core value lies in the enhanced polarity and compatibility driven by high VA content, combined with superior coating and compounding efficiency enabled by high MFR. Paired with a 900% elongation at break, it offers reliable process controllability for flexible end-use applications.

Technical Data Sheet (TDS)

Physical Properties

Property Test Conditions Value / Unit Test Standard
Density — 0.946 g/cm³ ASTM D1505
Melt Flow Rate, Mass 190 °C, 2.16 kg, Based on ASTM D1238 150 g/10min Internal Method
Vinyl Acetate Content — 28.0 wt% Internal Method
Durometer Hardness (Shore A, Compression Molded) — 74 ASTM D2240

Mechanical Properties

Property Test Conditions Value / Unit Test Standard
Tensile Strength, Break, Compression Molded 50 mm/min 4.5 MPa ASTM D638
Tensile Strain, Break, Compression Molded 50 mm/min 900 % ASTM D638

The technical data sheet (TDS) of EA28150 EVA material from LG Chem corporation, if there are differences, please refer to the official website of LG Chem.

Features & Benefits

  • High VA Content (28.0 wt%): Enhanced molecular polarity provides superior adhesion to paper, metal foils, polar plastics, and various fillers, making it an ideal base polymer for hot melt adhesives and tie-layer formulations.

  • Ultra-High Melt Flowability (MFR 150 g/10min): Rapid plasticization at low temperatures with high wetting and coating efficiency, suitable for high-speed extrusion coating, hot melt dispensing, and compounding processes.

  • Excellent Flexibility & Elastic Recovery (900% Elongation, Shore A 74): Produces soft, flex-resistant parts with a gentle tactile feel, ideal for soft-touch overmolding, seals, and elastomeric modification carriers.

  • Low Density & High Filler Tolerance: With a density of 0.946 g/cm³, it readily accommodates waxes, tackifying resins, mineral fillers, and antioxidants in formulations for cost optimization and property fine-tuning.

  • Batch Consistency & OEM Data Traceability: Mature polymerization processes by LG Chem ensure minimal fluctuation in MFR and VA content, allowing downstream converters to standardize formulations for continuous production.

Applications

  • Hot Melt & Pressure-Sensitive Adhesives (HMA / PSA): Primary base resin in EVA hot melt adhesives for carton sealing, bookbinding, labeling, and footwear assembly, delivering balanced tack and flexibility.

  • Lamination & Extrusion Coating: Food packaging films, aluminum-plastic laminates, non-woven fabric coatings, and cable jacketing blends, leveraging high VA content to improve interlayer adhesion and low-temperature resistance.

  • Modified Plastic Carrier: Used in POE/EVA toughening systems, masterbatch carriers, foamed shoe midsole modification, and flexible wire and cable insulation layers.

  • Soft-Touch & Consumer Goods: Low-hardness contact components including tool handle grips, sports equipment padding, flexible toy parts, and stationery sleeves.

  • Photovoltaic & Encapsulation Materials: Suitable for encapsulant film pre-compounding scenarios requiring specific VA content and crosslinking performance (specific crosslinking compatibility requires formulation verification).

  • Construction & Sealing: Door and window weatherstripping, pipe insulation layers, and waterproofing membrane modification to enhance low-temperature flexibility and crack resistance.

Frequently Asked Questions (FAQs)

Q1: Does EA28150 require drying before processing, and what are the recommended conditions?

A1: EVA has relatively low moisture absorption, though high-VA grades can accumulate surface moisture when stored in humid environments. Prior to compounding or high-end coating, low-temperature dehumidifying drying at 35–40 °C for 2–4 hours is recommended (to prevent pellet blocking or clumping caused by excessive heat), targeting a moisture content of <0.1% to avoid voids, splay marks, and thermal degradation. Unused pellets from opened bags should be tightly sealed against moisture.

Q2: How should I choose between EA28150 (28% VA) and low-VA EVA grades?

A2:

  • High VA (e.g., 28%): Softer with stronger polarity, higher transparency, and better adhesion, suitable for hot melt adhesives, laminated films, and soft-touch overmolding, though with lower rigidity and slightly lower heat resistance.

  • Low VA (5–18%): Harder with better stiffness and higher heat resistance, suitable for injection-molded structural parts, wire and cable jacketing, and foamed sheets.

  • Material selection depends on whether the end application prioritizes tackiness/softness/flexibility or stiffness/hardness/heat resistance.

Q3: Can EA28150 be used directly in food-contact or medical applications?

A3: This grade possesses food-contact application potential; however, actual compliance is subject to LG Chem’s lot-specific FDA, EU 10/2011, or GB 4806 declarations. Medical or implantable applications are not covered by default and require additional biocompatibility testing and end-product certification.

Q4: How are procurement, delivery, and documentation configured?

A4: Standard packaging consists of 25 kg moisture-proof bags or bulk jumbo bags. Classified as non-dangerous goods (Non-DG), it supports FCL/LCL ocean freight. Each shipment includes TDS, MSDS/SDS, and COA; RoHS and REACH SVHC declarations are available upon request. Supported trade terms include FOB China ports, CIF, and CFR, with payment via T/T or L/C at sight. Sampling for compounding trials and adhesion verification is recommended prior to mass production.

Related Products

Get Your Exclusive Quote Now

Submit your inquiry today and receive a professional competitive price tailored to your project requirements.