LG Chem EA28150 is a 28% VA, 150 g/10min MFR ethylene-vinyl acetate (EVA) copolymer offering 900% elongation and Shore A 74 hardness, engineered for hot melt adhesives, extrusion coating, and polymer compounding.
| Manufacturer | LG Chem |
|---|---|
| Density | 0.946 g/cm³ |
| MFR | 150 g/10min |
| Tensile Strength at Break | 4.5 MPa |
| Elongation at Break | 900% |
Note: See the product description for additional technical specifications
Manufacturer: LG Chem
Category: EVA (Ethylene-Vinyl Acetate Copolymer)
Appearance: Translucent to milky-white pellets, flexible texture, uniform surface, free from visible mechanical impurities
LG Chem EA28150 is a high vinyl acetate (VA) content, high melt flow rate (MFR) food-contact grade EVA base resin designed for hot melt adhesives and compounding modification. With a VA content of 28.0 wt% and a melt flow rate (190 °C / 2.16 kg) reaching 150 g/10min, it represents a typical “high-flexibility + high-flow” grade within the EVA portfolio, widely utilized in hot melt adhesives, multi-layer compounding, soft-touch overmolding, and elastomeric products.
Within LG Chem’s EVA product matrix, EA28150 serves as a standard benchmark resin for adhesive formulators, plastic compounders, and encapsulation material manufacturers due to its stable polymerization control and batch-to-batch consistency. For procurement specialists and R&D engineers, its core value lies in the enhanced polarity and compatibility driven by high VA content, combined with superior coating and compounding efficiency enabled by high MFR. Paired with a 900% elongation at break, it offers reliable process controllability for flexible end-use applications.
| Property | Test Conditions | Value / Unit | Test Standard |
| Density | — | 0.946 g/cm³ | ASTM D1505 |
| Melt Flow Rate, Mass | 190 °C, 2.16 kg, Based on ASTM D1238 | 150 g/10min | Internal Method |
| Vinyl Acetate Content | — | 28.0 wt% | Internal Method |
| Durometer Hardness (Shore A, Compression Molded) | — | 74 | ASTM D2240 |
| Property | Test Conditions | Value / Unit | Test Standard |
| Tensile Strength, Break, Compression Molded | 50 mm/min | 4.5 MPa | ASTM D638 |
| Tensile Strain, Break, Compression Molded | 50 mm/min | 900 % | ASTM D638 |
The technical data sheet (TDS) of EA28150 EVA material from LG Chem corporation, if there are differences, please refer to the official website of LG Chem.
High VA Content (28.0 wt%): Enhanced molecular polarity provides superior adhesion to paper, metal foils, polar plastics, and various fillers, making it an ideal base polymer for hot melt adhesives and tie-layer formulations.
Ultra-High Melt Flowability (MFR 150 g/10min): Rapid plasticization at low temperatures with high wetting and coating efficiency, suitable for high-speed extrusion coating, hot melt dispensing, and compounding processes.
Excellent Flexibility & Elastic Recovery (900% Elongation, Shore A 74): Produces soft, flex-resistant parts with a gentle tactile feel, ideal for soft-touch overmolding, seals, and elastomeric modification carriers.
Low Density & High Filler Tolerance: With a density of 0.946 g/cm³, it readily accommodates waxes, tackifying resins, mineral fillers, and antioxidants in formulations for cost optimization and property fine-tuning.
Batch Consistency & OEM Data Traceability: Mature polymerization processes by LG Chem ensure minimal fluctuation in MFR and VA content, allowing downstream converters to standardize formulations for continuous production.
Hot Melt & Pressure-Sensitive Adhesives (HMA / PSA): Primary base resin in EVA hot melt adhesives for carton sealing, bookbinding, labeling, and footwear assembly, delivering balanced tack and flexibility.
Lamination & Extrusion Coating: Food packaging films, aluminum-plastic laminates, non-woven fabric coatings, and cable jacketing blends, leveraging high VA content to improve interlayer adhesion and low-temperature resistance.
Modified Plastic Carrier: Used in POE/EVA toughening systems, masterbatch carriers, foamed shoe midsole modification, and flexible wire and cable insulation layers.
Soft-Touch & Consumer Goods: Low-hardness contact components including tool handle grips, sports equipment padding, flexible toy parts, and stationery sleeves.
Photovoltaic & Encapsulation Materials: Suitable for encapsulant film pre-compounding scenarios requiring specific VA content and crosslinking performance (specific crosslinking compatibility requires formulation verification).
Construction & Sealing: Door and window weatherstripping, pipe insulation layers, and waterproofing membrane modification to enhance low-temperature flexibility and crack resistance.
Q1: Does EA28150 require drying before processing, and what are the recommended conditions?
A1: EVA has relatively low moisture absorption, though high-VA grades can accumulate surface moisture when stored in humid environments. Prior to compounding or high-end coating, low-temperature dehumidifying drying at 35–40 °C for 2–4 hours is recommended (to prevent pellet blocking or clumping caused by excessive heat), targeting a moisture content of <0.1% to avoid voids, splay marks, and thermal degradation. Unused pellets from opened bags should be tightly sealed against moisture.
Q2: How should I choose between EA28150 (28% VA) and low-VA EVA grades?
A2:
High VA (e.g., 28%): Softer with stronger polarity, higher transparency, and better adhesion, suitable for hot melt adhesives, laminated films, and soft-touch overmolding, though with lower rigidity and slightly lower heat resistance.
Low VA (5–18%): Harder with better stiffness and higher heat resistance, suitable for injection-molded structural parts, wire and cable jacketing, and foamed sheets.
Material selection depends on whether the end application prioritizes tackiness/softness/flexibility or stiffness/hardness/heat resistance.
Q3: Can EA28150 be used directly in food-contact or medical applications?
A3: This grade possesses food-contact application potential; however, actual compliance is subject to LG Chem’s lot-specific FDA, EU 10/2011, or GB 4806 declarations. Medical or implantable applications are not covered by default and require additional biocompatibility testing and end-product certification.
Q4: How are procurement, delivery, and documentation configured?
A4: Standard packaging consists of 25 kg moisture-proof bags or bulk jumbo bags. Classified as non-dangerous goods (Non-DG), it supports FCL/LCL ocean freight. Each shipment includes TDS, MSDS/SDS, and COA; RoHS and REACH SVHC declarations are available upon request. Supported trade terms include FOB China ports, CIF, and CFR, with payment via T/T or L/C at sight. Sampling for compounding trials and adhesion verification is recommended prior to mass production.
Submit your inquiry today and receive a professional competitive price tailored to your project requirements.